Inventory

The Inventory app allows you to manage your collections (physical and/or virtual). Inventory stores bibliographic, holdings, and item data in the form of Instance, Holdings, and Item records. Instance records may be created within FOLIO or generated from records in source record storage (SRS). Data within Inventory integrates with other apps like Orders, Check in, Check out, and Requests.

Definition of terms related to the Inventory app:

  • Instance record. A record that contains bibliographic and administrative information about a particular resource. The Instance record is what is known as the bibliographic record. They are mostly derived from full bibliographic records (in MARC or other formats) and are intended to provide information for library staff to identify and select records in order to perform work on associated holdings and items.
  • Holdings record. A record that contains information such as location, call number, and volumes owned, that enables staff to locate and manage library holdings for materials in all formats. A Holdings record must be associated with an Instance record.
  • Item record. A record that contains information needed to identify and track a single item or piece. The Item record contains data specific to a single volume or piece, such as barcode and circulation status. An Item record must be associated with a Holdings record.
  • HRID. Human readable identifier, also called eye readable ID.
  • UUID. Universally unique identifier.
  • SRS. Source Record Storage. A storage layer in FOLIO. If an instance has an underlying MARC record, then this record is stored in SRS.
  • Intellectual item. This status can be used for an item record that does not correspond to a single, distinct physical object. May also be referred to as a “dummy record.”

Permissions

The permissions listed below allow you to interact with the Inventory app and determine what you can or cannot do within the app. You can assign permissions to users in the Users app.

The following are all the Inventory permissions:

  • Inventory: All permissions. This permission allows the user to perform all actions in Inventory.
  • Inventory: Import single bibliographic records. This permission allows the user to import and overlay Instance records from external sources. External sources must be configured in Settings.
  • Inventory: Mark items in process. This permission allows the user to update an item record’s Item status to In process.
  • Inventory: Mark items in process (non-requestable). This permission allows the user to update an item record’s Item status to In process (non-requestable).
  • Inventory: Mark items intellectual item. This permission allows the user to update an item record’s Item status to Intellectual.
  • Inventory: Mark items long missing. This permission allows the user to update an item record’s Item status to Long missing.
  • Inventory: Mark items restricted. This permission allows the user to update an item record’s Item status to Restricted.
  • Inventory: Mark items unavailable. This permission allows the user to update an item record’s Item status to Unavailable.
  • Inventory: Mark items unknown. This permission allows the user to update an item record’s Item status to Unknown.
  • Inventory: Mark items withdrawn. This permission allows the user to update an item record’s Item status to Withdrawn. The user can also view and edit items.
  • Inventory: Move holdings. This permission allows the user to move holdings records from one instance record to another. The user can also search and view instances, holdings, and items.
  • Inventory: Move items. This permission allows the user to move an item record from one holding record to another. The user can also search and view instances, holdings, and items.
  • Inventory: View instance records being suppressed for staff. This permission allows the user to search and view instance records that are suppressed for staff. (Not currently implemented; by default all users who can view records can view those suppressed for staff.)
  • Inventory: View instances, holdings, and items. This permission allows the user to view instances, holdings, and items.
  • Inventory: View, create holdings. This permission allows the user to create new holdings records. The user can also view holdings.
  • Inventory: View, create instances. This permission allows the user to create new instance records. The user can also view instances.
  • Inventory: View, create items. This permission allows the user to create new item records. The user can also view items.
  • Inventory: View, create, edit holdings. This permission allows the user to edit existing holdings records. The user can also view and create holdings.
  • Inventory: View, create, edit instances. This permission allows the user to edit existing instance records. The user can also view and create instances.
  • Inventory: View, create, edit items. This permission allows the user to edit existing item records. The user can also view and create items.
  • Inventory: View, create, edit, delete holdings. This permission allows the user to delete holdings records. The user can also view and edit holdings.
  • Inventory: View, create, edit, delete items. This permission allows the user to delete item records. The user can also view and edit items.
  • Inventory: View, create, edit, mark missing items. This permission allows the user to update an item record’s Item status to Missing. The user can also view and edit items.

Note: Some actions in Inventory require permissions in other apps. For example, View source requires permissions in quickMARC.

Creating an instance record manually in FOLIO

  1. In the Inventory pane, click Actions > New.
  2. In the New Instance window, fill in the Administrative data, Title data, Identifier, Contributor, Descriptive data, Instance notes, Electronic access, Subject, Classification, Instance relationship (analytics and bound-with), and Related instances sections. For more information on the fields and actions available in these sections, see the section descriptions below.
  3. Once you have included all of the information you want in the instance record, click Save & close. The instance record is saved.

Administrative data

The Administrative data section contains technical information about the instance record.

  • Suppress from discovery. If you want to suppress the record from your discovery layer, select the Suppress from discovery checkbox.
  • Staff suppress. If you want to suppress the record, and its associated holdings and item records, from staff who do not have the proper permissions to view the record, select the Staff suppress checkbox. If selected, staff need to have the permission Inventory: View instance records being suppressed for staff in order to view the record.
  • Previously held. If the resource was previously held by your library, select the Previously held checkbox. A library may adopt a policy to select the Previously held checkbox in the case where the library no longer owns the bibliographic resource described in the instance record, but for administrative reasons wishes to retain the record in the inventory and indicate previous ownership. For example, permission for library users to view or use items in a consortial collection may require proof that the library at some time owned those items.
  • Instance HRID. The human readable identifier, also called eye readable ID, a system-assigned sequential ID.
  • Source (required). Format of the instance source record, if a source record exists. For example, FOLIO if it’s a record created in Inventory, MARC if it’s a MARC record created in MARCcat, or EPKB if it’s a record coming from eHoldings. The system assigns the source automatically.
  • Cataloged date. Date when an instance is considered “cataloged.”
  • Instance status term. Select the instance status type to be assigned to the record. For example, the instance status may be: cataloged, uncataloged, batch loaded, or not yet assigned. Instance status types are configured by your library in the Settings app. See Settings > Inventory > Instance status types for more information.
  • Mode of issuance. A bibliographic categorization reflecting whether a resource is issued in one or more parts, the way it is updated, and whether its termination is predetermined or not. You can configure the values that appear in the drop-down list in Settings > Inventory > Modes of issuance. For records created in FOLIO, you may assign a value, but for instance records with an underlying MARC record in the SRS database the value is determined from the MARC fixed field values.
  • Statistical code. Statistical codes are locally assigned values used to filter and sort records. Multiple statistical codes can be added to a record. Statistical codes are configured by your library in the Settings app. See Settings > Inventory > Statistical codes for more information.

Adding a statistical code

  1. Click Add statistical code.
  2. Select the statistical code from the drop-down list.
  3. Repeat steps 1-2 as needed. The statistical code is saved once you save the instance.

Deleting a statistical code

  1. Find the statistical code you want to delete.
  2. Click the trash can icon next to the code. The code is removed from the record and is deleted once you save the instance.

Title data

The Title data section contains information about the title of the resource.

  • Resource title (required). The primary title (or label) associated with the resource.
  • Alternative titles. An alternative title for the resource. For example, the original language version title of a movie. You can add multiple alternative titles to a record.
  • Index title. Title normalized for browsing and searching based on the title without initial articles.
  • Series statements. A series title associated with the resource. For example, Harry Potter or Lecture Notes in Mathematics.
  • Preceding titles. The immediately preceding tile by which the resource was formerly identified. You can add multiple preceding titles to a record. For example, there may be multiple preceding titles which merged to form the one current title.
  • Succeeding titles. The immediately succeeding title of the resource. You can add multiple succeeding titles to a record. For example, there may be multiple succeeding titles if the current publication splits into multiple succeeding publications.

Adding an alternative title

  1. Click Add alternative title.
  2. Select the alternative title Type from the drop-down list. Alternative title types are configured by your library in the Settings app. See Settings > Inventory > Alternative title types for more information.
  3. Enter the Alternative title in the box.
  4. Repeat steps 1-3 as needed. The alternative title is saved once you save the instance.

Adding a series statement

  1. Click Add series.
  2. Enter the Series statement in the box.
  3. Repeat steps 1-2 as needed. The series statement is saved once you save the instance.

Adding a preceding title

Note: Adding a preceding title is optional, but if you click Add preceding title, you must enter a Title or delete the preceding title in order to save the instance record.

  1. Click Add preceding title.
  2. Enter the Title in the box, or to connect the preceding title to another instance in your Inventory, follow these steps:
    1. Click the +.
    2. In the Select instance dialog, in the Search & filter pane, enter all or part of the title in the search box and click Search.
    3. Optional: Filter results by Language, Resource Type, or Location.
    4. In the Search results pane, click the Title to select it. The title is connected to the instance record as a preceding title. The Title, Instance HRID, ISBN, and ISSN fields are automatically populated with information from the record, and Not connected changes to Connected.
  3. Optional: If you didn’t connect the Title to another instance, enter the ISBN or ISSN into their respective boxes.
  4. Repeat steps 1-3 as needed. The preceding title is saved once you save the instance.

Adding a succeeding title

Note: Adding a succeeding title is optional, but if you click Add succeeding title, you must enter a Title or delete the succeeding title in order to save the instance record.

  1. Click Add succeeding title.
  2. Enter the Title in the box, or to connect to the succeeding title represented by another instance in your Inventory, follow these steps:
    1. Click the +.
    2. In the Select instance dialog, in the Search & filter pane, enter all or part of the title in the search box and click Search.
    3. Optional: Filter results by Language, Resource Type, or Location.
    4. In the Search results pane, click the Title to select it. The title is connected to the instance record as a succeeding title. The Title, Instance HRID, ISBN, and ISSN fields are automatically populated with information from the record, and Not connected changes to Connected.
  3. Optional: If you didn’t connect the Title to another instance, enter the ISBN or ISSN into their respective boxes.
  4. Repeat steps 1-3 as needed. The succeeding title is saved once you save the instance.

Deleting an alternative title, preceding title, succeeding title, or series statement

  1. Find the alternative title, preceding title, succeeding title, or series statement you want to delete.
  2. Click the trash can icon next to the alternative title, preceding title, succeeding title, or series statement. The alternative title, preceding title, succeeding title, or series statement is removed from the record and is deleted once you save the instance.

Identifier

An extensible set of name-value pairs of identifiers associated with the resource.

Adding an identifier

Note: Adding an identifier is optional, but if you click Add identifier, you must enter a Type or delete the identifier in order to save the instance record.

  1. Click Add identifier.
  2. Select the identifier Type from the drop-down list. Identifier types are configured by your library in the Settings app. See Settings > Inventory > Resource identifier types for more information.
  3. Enter the Identifier in the box.
  4. Repeat steps 1-3 as needed. The identifier is saved once you save the instance.

Deleting an identifier

  1. Find the identifier you want to delete.
  2. Click the trash can icon next to the identifier. The identifier is removed from the edit record display and is permanently deleted once you save the instance.

Contributor

A contributor is any entity who has contributed to the bibliographic resource.

Adding a contributor

Note: Adding a contributor is optional, but if you click Add contributor, you must enter a Name and Name type or delete the contributor in order to save the instance record.

  1. Click Add contributor.
  2. Enter the contributor’s Name in the box.
  3. Select the Name type from the drop-down list.
  4. Optional: Select the contributor’s role Type from the drop-down list. Contributor types are configured by your library in the Settings app. See Settings > Inventory > Contributor types for more information.
  5. Optional: Enter a role type in the Type, free text box.
  6. Optional: Click Make primary to make the contributor the primary contributor.
  7. Repeat steps 1-6 as needed. The contributor is saved once you save the instance.

Deleting a contributor

  1. Find the contributor you want to delete.
  2. Click the trash can icon next to the contributor. The contributor is removed from the record and is deleted once you save the instance.

Descriptive data

Descriptive data contains descriptive information about the resource.

  • Publications. Data about the resource relating to its publication, distribution, manufacture, etc.
  • Editions. The edition statement.
  • Physical descriptions. Physical description of the described resource, including its extent, dimensions, and other physical details.
  • Resource type (required). A unique term for the resource that can be assigned from the RDA content term list or locally defined. Configured in Settings > Inventory > Resource types.
  • Nature of content. Nature of content is an RDA categorization.
  • Formats. A unique term for the format that can be assigned from the RDA carrier term list or locally defined. Configured in Settings > Inventory > Formats.
  • Languages. The set of languages used by the resource.
  • Publication frequency. The interval at which serial issues are released or an integrating resource is updated. For example, daily, weekly, monthly, quarterly, etc.
  • Publication range. Range of sequential designation/chronology of publication, or date range.

Adding a publication

Note: Adding a contributor is optional, but if you click Add publication, you must enter a Publisher, Place, or Publication date or delete the publication in order to save the instance record.

  1. Click Add publication.
  2. Optional: Enter a Publisher in the box.
  3. Optional: Enter a Publisher role in the box.
  4. Optional: Enter a Place in the box.
  5. Optional: Enter a Publication date in the box.
  6. Repeat steps 1-5 as needed. The publication data is saved once you save the instance.

Adding an edition

  1. Click Add edition.
  2. Enter the Edition in the box.
  3. Repeat steps 1-2 as needed. The edition statement is saved once you save the instance.

Adding a physical description

  1. Click Add description.
  2. Enter a Physical description in the box.
  3. Repeat steps 1-2 as needed. The physical description is saved once you save the instance.

Adding a nature of content

  1. Click Add nature of content.
  2. Select the Nature of content term from the drop-down list.
  3. Repeat steps 1-2 as needed. The nature of content is saved once you save the instance.

Adding a format

  1. Click Add format.
  2. Select the Format from the drop-down list.
  3. Repeat steps 1-2 as needed. The format is saved once you save the instance.

Adding a language

Note: Adding a language is optional, but if you click Add Language, you must enter a Language or delete the language in order to save the instance record.

  1. Click Add language.
  2. Select the Language from the drop-down list.
  3. Repeat steps 1-2 as needed. The language is saved once you save the instance.

Adding a publication frequency

  1. Click Add frequency.
  2. Enter the Publication frequency in the box.
  3. Repeat steps 1-2 as needed. The publication frequency is saved once you save the instance.

Adding a publication range

  1. Click Add range.
  2. Enter the Publication range in the box.
  3. Repeat steps 1-2 as needed. The publication range is saved once you save the instance.

Deleting a publication, edition, description, nature of content, format, language, publication frequency or publication range

  1. Find the publication, edition, description, nature of content, format, language, publication frequency or publication range
  2. Click the trash can icon next to the publication, edition, description, nature of content, format, language, publication frequency or publication range. The publication, edition, description, nature of content, format, language, publication frequency or publication range is removed from the record and is deleted once you save the instance.

Instance notes

In the Instance notes section, you can add any notes about the instance record.

Adding a note

Note: Adding a note is optional, but if you click Add note, you must enter a Note or delete the note in order to save the instance record.

  1. Click Add note.
  2. Select the Note type from the drop-down list. You can configure the values that appear in the drop-down list in Settings > Inventory > Instance note types.
  3. Enter a Note in the box.
  4. Optional: If you only want the note to be visible to staff with the permission Inventory: View instance records being suppressed for staff, select the Staff only checkbox.
  5. Repeat steps 1-4 as needed. The note is saved once you save the instance.

Deleting a note

  1. Find the note you want to delete.
  2. Click the trash can icon next to the note. The note is removed from the record and is deleted once you save the instance.

Electronic access

In the Electronic access section, you can add online access information for the resource.

Adding electronic access

  1. Click Add electronic access.
  2. Optional: Select a Relationship from the drop-down list.
  3. Optional: Enter a URI in the box.
  4. Optional: Enter Link text in the box.
  5. Optional: Enter the Materials specified in the box.
  6. Optional: Enter a URL public note in the box.
  7. Repeat steps 1-6 as needed. The electronic access is saved once you save the instance.

Deleting electronic access

  1. Find the electronic access you want to delete.
  2. Click the trash can icon next to the electronic access. The electronic access is removed from the record and is deleted once you save the instance.

Subject

In the Subject section, you can add any subjects that pertain to the resource.

Adding a subject

  1. Click Add subject.
  2. Enter the Subjects in the box.
  3. Repeat steps 1-2 as needed. The subject is saved once you save the instance.

Removing a subject

  1. Find the subject you want to delete.
  2. Click the trash can icon next to the subject. The subject is removed from the record and is deleted once you save the instance.

Classification

In the Classification section, you can add classification information for the resource.

Adding a classification

Note: Adding a classification is optional, but if you click Add classification, you must enter a Classification identifier type and Classification or delete the classification in order to save the instance record.

  1. Click Add classification.
  2. Select a Classification identifier type from the drop-down list. Configured in Settings > Inventory > Classification identifier types.
  3. Enter a Classification in the box.
  4. Repeat steps 1-3 as needed. The classification is saved once you save the instance.

Deleting a classification

  1. Find the classification you want to delete.
  2. Click the trash can icon next to the classification. The classification is removed from the record and is deleted once you save the instance.

Instance relationship (analytics and bound-with)

In the Instance relationship section, you can add any relationships between the instance and other instances.

  • Parent instances. The main link in a bound-with situation: It will have an item record (and thus barcode) that all other bibliographic records associated with a given bound-with volume can link to. Child records are those associated bibliographic records. Child records will have LKR fields in the bibliographic record that include the ADM number of the parent record and “Enum. Level.1” information found in the parent record’s item record. Doing this allows all item record information in the parent record to display in the child record, so the same barcode, sublibrary, collection, description, call number, etc. will show up for all titles in a bound-with.
  • Child instances. Associated with linking bound-withs, which allows for “links” between separate bibliographic records and/or a bibliographic record and items belonging to another bibliographic record. Child recordsare those associated bibliographic records.

Adding a parent instance

Note: Adding a parent instance is optional, but if you click Add parent instance, you must enter Parent instances and Type of relation or delete the parent instance in order to save the instance record.

  1. Click Add parent instance.
  2. Enter the Parent instances in the box.
  3. Select the Type of relation from the drop-down list.
  4. Repeat steps 1-3 as needed. The parent instance is saved once you save the instance.

Adding a child instance

Note: Adding a classification is optional, but if you click Add child instance, you must enter Child instance and Type of relation or delete the child instance in order to save the instance record.

  1. Click Add child instance.
  2. Enter the Child instance in the box.
  3. Select the Type of relation from the drop-down list.
  4. Repeat steps 1-3 as needed. The child instance is saved once you save the instance.

Removing a parent or child instance

  1. Find the parent or child instance you want to delete.
  2. Click the trash can icon next to the parent or child instance. The parent or child instance is removed from the record and is deleted once you save the instance.

The Related instances section displays any linked parent or child instances.

Creating a Fast Add instance record

You can use Fast Add to create an instance record with a limited set of information that is most likely to be needed. To see the complete list of information that can be added to the record, see Creating an instance record manually in FOLIO, Adding holdings to a record, and Adding an item to a record.

  1. In the Inventory pane, click Actions > New Fast Add Record.
  2. In the New fast add record, fill in the Instance, Holdings, and Item sections. For more information on the fields and actions available in these sections, see the section descriptions below.
  3. Once you have included all of the information you want in the instance record, click Save & close. The instance record is saved.

Instance

The Instances section contains select instance record fields. For all fields available in an instance record, see Creating an instance record manually in FOLIO.

  • Suppress from discovery. Fast add records are suppressed from your discovery layer by default. If you want to display the record in your discovery layer, clear the Suppress from discovery checkbox.
  • Instance status term. Select the instance status type to be assigned to the record. For example, the instance status may be: cataloged, uncataloged, batch loaded, or not yet assigned. Instance status types are configured by your library in the Settings app. See Settings > Inventory > Instance status types for more information.
  • Resource title (required). The primary title (or label) associated with the resource.
  • Publication date. The year of publication, distribution, etc.
  • ISBN. International Standard Book Number.
  • ISSN. International Standard Serial Number.
  • Resource type (required). A unique term for the resource that can be assigned from the RDA content term list or locally defined. Configured in Settings > Inventory > Resource types.
  • Contributors. Any entities who have contributed to the instance.

Adding a contributor

Note: Adding a contributor is optional, but if you click Add contributor, you must enter a Name and Name type or delete the contributor in order to save the instance record.

  1. Click Add contributor.
  2. Enter the contributor’s Name in the box.
  3. Select the Name type from the drop-down list.
  4. Optional: Click Make primary to make the contributor the primary contributor.
  5. Repeat steps 1-4 as needed. The contributor is saved once you save the fast add record.

Deleting a contributor

  1. Find the contributor you want to delete.
  2. Click the trash can icon next to the contributor. The contributor is removed from the record and is deleted once you save the fast add record.

Holdings

The Holdings section contains select holdings record fields. For all fields available in a holdings record, see Creating a holdings record.

  • Permanent location (required). The default location of the resource, which can be a physical location where the resource is stored or an online location. Permanent location is assigned at the holdings level, but can be overridden at the item level, if needed. Select a Permanent location from the drop-down list, or click Location look-up to select a location.
  • Temporary location. A temporary location for the resource, which can be a physical location where the resource is stored or an online location. Temporary location can be assigned at the holdings level and overridden at the item level, if needed. Select a Temporary location from the drop-down list, or click Location look-up to select a location.
  • Call number type. The classification system used for the call number. Select the Call number type from the drop-down list. Configured in Settings > Inventory > Call number types.
  • Call number prefix. Prefix of the call number on the holdings level. For example, FIC.
  • Call number. Call number is an identifier assigned to an item, usually printed on a label attached to the item. The call number is used to determine the resource’s physical position in a shelving sequence. For example, K1 .M44.
  • Call number suffix. Suffix of the call number on the holdings level. For example, the year (2001).

Item

The Item section contains select item record fields. For all fields available in an item record, see Adding an item to a record.

  • Barcode. Generally a numerical sequence attached to the resource and validated by a barcode scanner. Must be a unique value.
  • Material type (required). Describes the material nature of a specific item, with the intention to permit more specific information than resource type alone. Configured in Settings > Inventory > Material types.
  • Permanent loan type (required). The default loan type for a given item. For example, Can circulate, Course reserves, Reading room, Selected, etc. Configured in Settings > Inventory > Loan types.
  • Item notes (required). Any notes about the item that you want to appear to staff during check in or check out.
  • Electronic access. Online access information for the item.

Adding check in / check out notes

A check in or check out note is required by default.

  1. Select the Note type from the drop-down list. Configured in Settings > Inventory > Item note types.
  2. Enter a Note in the box.
  3. Optional: If you want the note to be visible to only staff with the proper permissions to view the note, select the Staff only checkbox.
  4. To add another note, click Add check in / check out note and repeat steps 1-3. The note is saved once you save the fast add record.

Removing check in / check out notes

  1. Find the note you want to delete.
  2. Click the trash can icon next to the note. The note is removed from the record and is deleted once you save the fast add record.

Adding electronic access

  1. Click Add electronic access.
  2. Optional: Select a Relationship from the drop-down list.
  3. Optional: Enter a URI in the box.
  4. Optional: Enter Link text in the box.
  5. Optional: Enter the Materials specified in the box.
  6. Optional: Enter a URL public note in the box.
  7. Repeat steps 1-6 as needed. The electronic access is saved once you save the fast add record.

Removing electronic access

  1. Find the electronic access you want to delete.
  2. Click the trash can icon next to the electronic access. The electronic access is removed from the record and is deleted once you save the fast add record.

Creating an instance record using the Import action in FOLIO

  1. In the default or middle pane, click Actions > Import.
  2. In the Single Record Import dialog box, select the source of the record to be imported (e.g., Library of Congress, OCLC WorldCat, BnF).
  3. Enter the record number, without any prefixes, in the Enter [source] identifier box.
  4. Click Import.

A new instance record is created along with an underlying SRS record. Only the editable Administrative Data elements in the instance can be edited directly in Inventory. These elements are entered as described in Administrative Data.

Any other edits to the instance record data must be made by editing the source record using quickMARC.

Adding holdings to a record

  1. Find the instance record to which you want to add holdings and select it.
  2. In the Instance record details pane, in the Holdings section, click Add holdings.
  3. In the Holdings record window, fill in the Administrative data, Location, Holdings details, Holdings notes, Electronic access, Acquisition, and Receiving history sections. For more information on the fields and actions available in these sections, see the section descriptions below.
  4. Once you have included all of the information you want in the holdings record, click Save & close. The record is saved.

Administrative data

The Administrative data section contains technical information about the holdings.

  • Suppress from discovery. If you want to suppress the record from your discovery layer, select the Suppress from discovery checkbox.
  • Holdings HRID. The human readable ID, also called eye readable ID. A system-assigned sequential ID which maps to the Holdings ID.
  • Source. Format of the holdings source record, if a source record exists. For example, FOLIO if it’s a record created in Inventory, MARC if it’s a MARC record created in MARCcat, or EPKB if it’s a record coming from eHoldings.
  • Former holdings ID. Former holdings ID
  • Holdings type. Indicates the type of bibliographic format of the holdings record. For example, print or electronic. Configured in Settings > Inventory > Holdings types.
  • Statistical code. Statistical codes (e.g. ASER; name: Active serial; type: SERM (Serial management) or books; name: Book, print (books); type ARL (Collection stats) etc.). Configured in Settings.

Adding former holdings IDs

  1. Click Add former holdings ID.
  2. Enter the Former holdings ID in the box.
  3. Repeat steps 1-2 as needed. The former holdings ID is saved once you save the holdings record.

Adding a statistical code

  1. Click Add statistical code.
  2. Select the statistical code from the drop-down list.
  3. Repeat steps 1-2 as needed. The statistical code is saved once you save the holdings record.

Deleting a former holdings ID or statistical code

  1. Find the former holdings ID or statistical code you want to delete.
  2. Click the trash can icon next to the ID or code. The ID or code is removed from the record and is deleted once you save the holdings record.

Location

The Location section contains information on the physical or electronic location of the holdings.

  • Permanent (required). The default location of the resource, which can be a physical location where the resource is stored or an online location. Permanent location is assigned at the holdings level, but can be overridden at the item level, if needed. Select a Permanent location from the drop-down list, or click Location look-up to select a location.
  • Temporary. A temporary location for the resource, which can be a physical location where the resource is stored or an online location. Temporary location can be assigned at the holdings level and overridden at the item level, if needed. Select a Temporary location from the drop-down list, or click Location look-up to select a location.
  • Shelving order. A system-generated normalization of the call number that allows for call number sorting in reports and in search results.
  • Shelving title. ???
  • Copy number. The copy number of the holdings.
  • Call number type. The classification system used for the call number. Select the Call number type from the drop-down list. Configured in Settings > Inventory > Call number types.
  • Call number prefix. Prefix of the call number on the holdings level. For example, FIC.
  • Call number. Call Number is an identifier assigned to an item, usually printed on a label attached to the item. The call number is used to determine the items physical position in a shelving sequence (e.g. K1 .M44)
  • Call number suffix. Suffix of the call number on the holdings level. For example, the year (2001).

Holdings details

The Holding details section contains additional details about the holdings.

  • Number of items. Number of items in the holding?
  • Holdings statements. Specifies the exact content to which the library has access, typically for continuing publications.
  • ILL policy. Select list of values defining the library’s lending policy, the ILL policy. For example, Will lend, Will not lend, Will reproduce, Will not reproduce, etc. Configured in Settings > Inventory > ILL policy.
  • Digitization policy. Notes about the digitization policy.
  • Retention policy. Notes about the retention policy.

Adding a holdings statement

  1. Click Add holdings statement.
  2. Optional: Enter a Holdings statement.
  3. Optional: Enter a Holdings statement public note. Bibliographic public note associated with the holdings statement.
  4. Optional: Enter a Holdings statement staff note. Bibliographic staff note associated to the holdings statement.
  5. Repeat steps 1-4 as needed. The holdings statement is saved once you save the holdings record.

Adding a holding statements for supplement

Specifies the exact content of Supplements to which the library has access, typically for continuing publications.

  1. Click Add holdings statement for supplements.
  2. Optional: Enter a Holdings statement for supplements.
  3. Optional: Enter a Holdings statement for supplements public note.
  4. Optional: Enter a Holdings statement for supplements staff note.
  5. Repeat steps 1-4 as needed. The holdings statement is saved once you save the holdings record.

Adding a holding statements for indexes

Specifies the exact content of Indexes to which the library has access, typically for continuing publications.

  1. Click Add holdings statement for indexes.
  2. Optional: Enter a Holdings statement for indexes.
  3. Optional: Enter a Holdings statement for indexes public note.
  4. Optional: Enter a Holdings statement for indexes staff note.
  5. Repeat steps 1-4 as needed. The holdings statement is saved once you save the holdings record.

Deleting a holding statement

  1. Find the holdings statement you want to delete.
  2. Click the trash can icon next to the holdings statement. The holdings statement is removed from the record and is deleted once you save the holdings record.

Holdings notes

The Holdings notes section contains any notes about the holdings.

Adding a note

  1. Click Add note.
  2. Select the Note type from the drop-down list. Configured in Settings > Inventory > Holdings note types.
  3. Enter a Note in the box.
  4. Optional: If you want the note to be visible to only staff with the proper permissions to view the note, select the Staff only checkbox.
  5. Repeat steps 1-4 as needed. The note is saved once you save the instance.

Removing a note

  1. Find the note you want to delete.
  2. Click the trash can icon next to the note. The note is removed from the record and is deleted once you save the holdings record.

Electronic access

In the Electronic access section, you can add online access information for the resource.

Adding electronic access

  1. Click Add electronic access.
  2. Optional: Select a Relationship from the drop-down list.
  3. Optional: Enter a URI in the box.
  4. Optional: Enter Link text in the box.
  5. Optional: Enter the Materials specified in the box.
  6. Optional: Enter a URL public note in the box.
  7. Repeat steps 1-6 as needed. The electronic access is saved once you save the holdings record.

Deleting electronic access

  1. Find the electronic access you want to delete.
  2. Click the trash can icon next to the electronic access. The electronic access is removed from the record and is deleted once you save the holdings record.

Acquisition

The Acquisition section contains information on the acquisition of the holdings.

  • Acquisition method. The method by which the holding was acquired.
  • Order format. The order format of the holding. For example, DVD or monograph.
  • Receipt status. Receipt status. For example, Pending, Awaiting receipt, Partially Received, Fully received, Receipt not required, and Cancelled.

Receiving history

Receiving history is used for serials and continuing resources? Shows the materials that have already been received?

Adding receiving history

  1. Click Add receiving history.
  2. Optional: If you want to display the enumeration and chronology to the public, select the Public display checkbox.
  3. Optional: Enter the Enumeration.
  4. Optional: Enter the Chronology.
  5. Repeat steps 1-4 as needed. The receiving history is saved once you save the holdings record.

Deleting receiving history

  1. Find the receiving history you want to delete.
  2. Click the trash can icon next to the receiving history. The receiving history is removed from the record and is deleted once you save the holdings record.

Adding an item to a record

  1. Find the record to which you want to add an item and select it.
  2. In the Instance record details pane, in the Holdings section, click Add item.
  3. In the Item record window, fill in the Administrative data, Item data, Enumeration data, Condition, Item notes, Loan and availability, Location, and Electronic access sections. For more information on the fields and actions available in these sections, see the section descriptions below.
  4. Once you have included all of the information you want in the item record, click Save & close. The item record is saved.

Administrative data

  • Record last updated. Date and time when the record was last updated. Click Record last updated to see the next three fields.
  • Source. Name of the user who last updated the record.
  • Record created. Date and time when the record was created.
  • Source. Name of the user who created the record.
  • Suppress from discovery. If you want to suppress the record from your discovery layer, select the Suppress from discovery checkbox.
  • Item HRID. The human readable ID, also called eye readable ID. A system-assigned sequential ID which maps to the Item ID
  • Barcode. Generally a numerical sequence attached to the resource and validated by a barcode scanner. Must be a unique value.
  • Accession number. A unique number assigned to an item in the order in which it is added to a library collection. Most libraries assign accession numbers in a continuous numerical sequence, but some use a code system to indicate type of material and/or year of accession in addition to order of accession. Also called inventar number.
  • Item identifier. Item identifier number. For example, imported from the union catalogue (read only).
  • Former identifier. Previous identifiers assigned to the item.
  • Statistical code. Statistical codes (e.g. ASER; name: Active serial; type: SERM (Serial management) or books; name: Book, print (books); type ARL (Collection stats) etc.)

Adding a former identifier

  1. Click Add former identifier.
  2. Enter a Former identifier in the box.
  3. Repeat steps 1-2 as needed. The former identifier is saved once you save the item.

Adding a statistical code

  1. Click Add statistical code.
  2. Select the statistical code from the drop-down list.
  3. Repeat steps 1-2 as needed. The statistical code is saved once you save the item.

Deleting a former identifier or statistical code

  1. Find the former identifier or statistical code you want to delete.
  2. Click the trash can icon next to the identifier or code. The identifier or code is removed from the record and is deleted once you save the item.

Item data

The Item data section contains additional information on the item.

  • Material type (required). Describes the material nature of a specific item, with the intention to permit more specific information than resource type alone. Configured in Settings > Inventory > Material types.
  • Copy number. Copy number is the piece identifier. The copy number reflects if the library has one (or more) copies of a single-volume monograph; one (or more) copies of a multi-volume, (e.g. Copy 1, or C.7.)
  • Call number type. The classification system used for the call number. Select the Call number type from the drop-down list. Configured in Settings > Inventory > Call number types.
  • Call number prefix. Prefix of the call number on the item level.
  • Call number. Call number is an identifier assigned to an item, usually printed on a label attached to the item. The call number is used to determine the resource’s physical position in a shelving sequence. For example, K1 .M44.
  • Call number suffix. Suffix of the call number on the item level.
  • Number of pieces. Number of pieces. Used when an item is checked out or returned to verify that all parts are present (e.g. 7 CDs in a set).
  • Description of pieces. Description of pieces. For example, 500 puzzle pieces.

Enumeration data

The Enumeration data section contains enumeration information for any serials or multipart monographs.

  • Enumeration. The descriptive information for the numbering scheme of a serial, usually identified by level and a descriptive caption. For example, level 0 = v. and level 1 = no. This means that each issue of the serial has a volume and an issue number that would appear (v.71:no.2-4).
  • Chronology. The descriptive information for the dating scheme of a serial, usually identified by level. For example, level 0 = year level 1 = month. This means that each issue of the serial has a month and a year on each issue (1985:July-Dec.)
  • Volume. Volume is intended for multipart monographs. For example, a biography of George Bernard Shaw in three volumes.
  • Year, caption. In multipart monographs, a caption is used to label a level of chronology. For example, year 1985.

Adding a year, caption

  1. Click Add year, caption.
  2. Enter a Year, caption in the box.
  3. Repeat steps 1-2 as needed. The year, caption is saved once you save the item.

Deleting a year, caption

  1. Find the year, caption you want to delete.
  2. Click the trash can icon next to the year, caption. The year, caption is removed from the record and is deleted once you save the item.

Condition

The Condition section contains information on the condition of the item.

  • Number of missing pieces. Number of missing pieces
  • Missing pieces. Description of the missing pieces.
  • Date. Date when the piece(s) went missing
  • Item damaged status. Whether the item is damaged or not damaged
  • Date. Date when the pieces were damaged.

Item notes

The Item notes section contains any notes about the item.

Adding a note

  1. Click Add note.
  2. Select the Note type from the drop-down list. Configured in Settings > Inventory > Item note types.
  3. Enter a Note in the box.
  4. Optional: If you want the note to be visible to only staff with the proper permissions to view the note, select the Staff only checkbox.
  5. Repeat steps 1-4 as needed. The note is saved once you save the item.

Deleting a note

  1. Find the note you want to delete.
  2. Click the trash can icon next to the note. The note is removed from the record and is deleted once you save the item.

Loan and availability

The Loan and availability section contains information on the lending status of the item.

  • Permanent loan type (required). The default loan type for the item. For example, Can circulate, Course reserves, Reading room, Selected, etc. Configured in Settings > Inventory > Loan types.
  • Temporary loan type. A temporary loan type for the item. For example, Can circulate, Course reserves, Reading room, Selected, etc. Configured in Settings > Inventory > Loan types.
  • Status. Name of the item state. For example, Available, Checked out, In transit, Awaiting pickup, On order, etc. By default, the item’s status is set to Available.
  • Check in / check out notes. Any notes about the item that you want to appear to staff during check in or check out.

Adding check in / check out notes

A check in or check out note is required by default.

  1. Select the Note type from the drop-down list. Configured in Settings > Inventory > Item note types.
  2. Enter a Note in the box.
  3. Optional: If you want the note to be visible to only staff with the proper permissions to view the note, select the Staff only checkbox.
  4. To add another note, click Add check in / check out note and repeat steps 1-3. The note is saved once you save the fast add record.

Removing check in / check out notes

  1. Find the note you want to delete.
  2. Click the trash can icon next to the note. The note is removed from the record and is deleted once you save the fast add record.

Location

The Location section contains information on the physical or electronic location of the item.

  • Permanent. The default location of the resource, which can be a physical location where the resource is stored or an online location. Permanent location is assigned at the holdings level, but can be overridden at the item level, if needed. Select a Permanent location from the drop-down list, or click Location look-up to select a location.
  • Temporary. A temporary location for the resource, which can be a physical location where the resource is stored or an online location. Temporary location can be assigned at the holdings level and overridden at the item level, if needed. Select a Temporary location from the drop-down list, or click Location look-up to select a location.

Electronic access

In the Electronic access section, you can add online access information for the resource.

Adding electronic access

  1. Click Add electronic access.
  2. Optional: Select a Relationship from the drop-down list.
  3. Optional: Enter a URI in the box.
  4. Optional: Enter Link text in the box.
  5. Optional: Enter the Materials specified in the box.
  6. Optional: Enter a URL public note in the box.
  7. Repeat steps 1-6 as needed. The electronic access is saved once you save the instance.

Deleting electronic access

  1. Find the electronic access you want to delete.
  2. Click the trash can icon next to the electronic access. The electronic access is removed from the record and is deleted once you save the instance.

Generating an In transit items report

The In transit items report displays all items with the Item status of In transit.

  • In the Inventory pane, click Actions > In transit items report (CSV). Depending on your browser and its configurations, the file automatically downloads or you are prompted to save it.

Saving instances UUIDs

Produces a .csv file that is ONLY a listing of UUIDs

  1. Find the instances, holdings, or items with the instances UUIDs you want to save.
  2. In the Inventory pane, click Actions > Save instances UUIDs. Depending on your browser and its configurations, the file automatically downloads or you are prompted to save it.

Saving instances CQL query

Produces a file that contains the ‘commands’ used in the query, in Contextual Query Language (CQL), as defined on dev.folio.org.

  1. Find the instances, holdings, or items with the instances CQL queries you want to save.
  2. In the Inventory pane, click Actions > Save instances CQL query. Depending on your browser and its configurations, the file automatically downloads or you are prompted to save it.

Exporting instances (MARC)

See Exporting instances (MARC).

Exporting instances (JSON)

Exporting instances to JSON is not implemented at this time.

Searching for a record

When you search for a record in Inventory, you can toggle between searching on an instance, holdings, or item level. Searching for an instance record supports bibliographic data searches. Searching for a holdings or item record allows you to search through instance record data along with holdings and item specific data elements.

You can search for instance, holdings, or items by clicking on either Instance, Holdings, or Item in the Search & filter pane. The elements available for searching and filtering are different based on your selection, but the results always display instance records.

To search, first select the record type (instance, holdings, or item); enter your search terms into the box and click Search. Select the Keyword (title, contributor, identifier) drop-down list to search through one of the following:

  • Keyword (title, contributor, identifier). Keyword search through title, contributor, and identifier fields.
  • Contributor. Keyword search through all contributor fields.
  • Title (all). Keyword search through all title fields. This includes searching the equivalent of title proper, alternative titles (including uniform titles) and, series titles, but not preceding and succeeding titles.
  • Identifier (all). Searches through all identifier types. Not normalized: the search may be left truncated, otherwise the entire identifier, including any prefix, must be entered.
  • ISBN. Searches the number exactly as it appears in the data. For example, if there are hyphens in the data, the hyphens must be entered in the search.
  • ISSN. Searches should include hyphens.
  • Subject. Keyword search through all subject fields. This may include Library of Congress Subjects, FAST, and other subject vocabularies, including Genre/Form terms.
  • Instance HRID. Human readable identifier for the record.
  • Instance UUID. Universally unique identifier for the record.
  • Query search. A search for advanced users to query by property names using CQL.
  • Call number, eye readable. Requires you to enter the call number exactly as it appears in the holdings record, including punctuation.
  • Call number, normalized. NOT AVAILABLE IN KIWI (will be available again in a subsequent release) Ignores any characters other than numbers and letters, such as punctuation and spaces.
  • Holdings HRID. Human readable identifier for the record.
  • Barcode. Allows you to scan, copy/paste, or type a barcode.
  • Effective call number (item) eye readable. Requires you to enter the call number exactly as it appears in the holdings record, including the punctuation and call number prefix.
  • Effective call number (item), normalized. NOT AVAILABLE IN KIWI (will be available again in a subsequent release) Ignores any characters other than numbers and letters, such as punctuation and spaces.
  • Item HRID. Human readable identifier for the record.

You can also search for instance, holdings, or item records by selecting any of the filters in the Search & filter pane. Additionally, you can apply the filters after you perform a search to limit your results. The filters available vary depending on whether you are searching for an instance, holdings, or item record. See the sections below for more information.

When using filters, keep the following in mind:

  • Multiple filters can be combined to further limit searches.
  • Multiple values in the same filter are combined with “OR.”
  • Multiple values in different filters are combined with “AND.”

For example, a search filtered by multiple locations finds resources that match any of those locations. However, a search filtered by a location and a language finds resources in that location and in that language.

Effective location (item)

To search for instances, holdings, or items based on their effective location, follow these steps:

  1. In the Search & filter pane, under Effective location (item), click the drop-down list.
  2. Either enter the location or select it from the list.
  3. Repeat step 2 to add more than one location. Your search results appear in the Inventory pane.

Language

To search for instances in a specific language, follow these steps:

  1. In the Search & filter pane, click Language.
  2. Click the drop-down list and either enter the language or select it from the list.
  3. Repeat step 2 to add more than one language. Your search results appear in the Inventory pane.

Resource type

To search for instances with a specific resource type, follow these steps:

  1. In the Search & filter pane, click Resource Type.
  2. Click the drop-down list and either enter the resource type or select it from the list.
  3. Repeat step 2 to add more than one resource type. Your search results appear in the Inventory pane.

Format

To search for instances with a specific format, follow these steps:

  1. In the Search & filter pane, click Format.
  2. Click the drop-down list and either enter the format or select it from the list.
  3. Repeat step 2 to add more than one format. Your search results appear in the Inventory pane.

Mode of issuance

To search for instances based on their mode of issuance, follow these steps:

  1. In the Search & filter pane, click Mode of issuance.
  2. Click the drop-down list and either enter the mode or select it from the list.
  3. Repeat step 2 to add more than one mode. Your search results appear in the Inventory pane.

Nature of content

To search for instances based on their nature of content, follow these steps:

  1. In the Search & filter pane, click Nature of content.
  2. Click the drop-down list and either enter the nature of content or select it from the list.
  3. Repeat step 2 to add more than one nature of content. Your search results appear in the Inventory pane.

Staff suppress

To search for instances by whether or not they are suppressed to staff, in the Search & filter pane, click Staff suppress and select one of the following:

  • Yes. The instance is suppressed to staff.
  • No. The instance is not suppressed to staff.

Suppress from discovery

To search for instances, holdings, or items by whether or not they are suppressed from discovery, in the Search & filter pane, click Suppress from discovery and select one of the following:

  • Yes. The instance, holding, or item is suppressed from discovery
  • No. The instance, holding, or item is not suppressed from discovery.

Date created

To search for instances based on the date they were created, follow these steps:

  1. In the Search & filter pane, click Date created.
  2. Enter a start date in the From box and an end date in the To box.
  3. Click Apply. Your search results appear in the Inventory pane.

Date updated

To search for instances based on the date they were last updated, follow these steps:

  1. In the Search & filter pane, click Date updated.
  2. Enter a start date in the From box and an end date in the To box.
  3. Click Apply. Your search results appear in the Inventory pane.

Source

To search for instances based on their source, in the Search & filter pane, click Source and select one of the following:

  • FOLIO. The instance was created in FOLIO.
  • MARC. The instance was created by uploading MARC records.

Tags

To search for instances based on assigned tags, follow these steps:

  1. In the Search & filter pane, click Tags.
  2. Click the drop-down list and either enter the tag or select it from the list.
  3. Repeat step 2 to add more than one tag. Your search results appear in the Inventory pane.

Holdings permanent location

To search for holdings or items based on their holdings permanent location, follow these steps:

  1. In the Search & filter pane, click Holdings permanent location.
  2. Click the drop-down list and either enter the holdings permanent location or select it from the list.
  3. Repeat step 2 to add more than one holdings permanent location. Your search results appear in the Inventory pane.

Item status

To search for items based on their item status, follow these steps:

  1. In the Search & filter pane, under Item status, click the drop-down list.
  2. Either enter the item status or select it from the list.
  3. Repeat step 2 to add more than one status. Your search results appear in the Inventory pane.

Material type

To search for items based on their material type, follow these steps:

  1. In the Search & filter pane, click Material type.
  2. Click the drop-down list and either enter the material type or select it from the list.
  3. Repeat step 2 to add more than one material type. Your search results appear in the Inventory pane.

Viewing an instance record

Once you search for an instance, holding, or item, the following information appears in the Inventory pane:

  • Title. Title of the instance.
  • Contributors. Contributors of the instance.
  • Publishers. Publisher of the instance.
  • Relation. Relation to other instances?

In the search results, click any result to view the instance record.

Viewing holdings records

Holdings records can be viewed once you have an instance record opened.

To view a holdings record, follow these steps:

  1. Find the instance with the holdings record you want to view and select it.
  2. In the Instance record details pane, in the Holdings section, click View holdings. The Holding record details window appears.

Viewing an item record

Item records can be viewed once you have an instance record opened.

To view an item record, follow these steps:

  1. Find the instance with the item record you want to view and select it.
  2. In the Instance record details pane, in the Holdings section, click the Item barcode of the item you want to view. The Item record details window appears.

Editing an instance record

  1. Find the instance you want to edit and select it.
  2. In the Instance record details pane, click Actions > Edit.
  3. Make your desired changes to the instance record.
  4. Click Save and close. The instance record is updated.

Editing an instance record with underlying MARC using the Re-import action in FOLIO

  1. Find the instance you want to edit and select it.
  2. In the Instance record details pane, click Actions > Re-import.
  3. In the Single Record Import dialog box, select the source of the record to be imported (e.g., Library of Congress, OCLC WorldCat, BnF).
  4. Enter the record number, without any prefixes, in the Enter [source] identifier box.
  5. Click Import.

The selected instance record and any underlying source data will be replaced by the re-imported record. The instance uuid and hrid as well as manually configurable Administrative Data such as suppression from discovery, instance status, cataloged date, and any statistical codes assigned will remain the same. Some configurations may be made locally to the import profile used for single record import. These changes are made in the settings for Data Import.

Duplicating an instance record

  1. Find the instance you want to duplicate and select it.
  2. In the Instance record details pane, click Actions > Duplicate.
  3. In the New instance window, make your desired changes to the record.
  4. Click Save and close. The instance is duplicated.

Moving items within an instance

To move items to a different holdings record within the same instance record, follow these steps:

  1. Find the instance with the items you want to move and select it.
  2. In the Instance record details pane, click Actions > Move items within an instance. A drag and drop column and checkbox column appear in the Holdings tables.
  3. In the Holdings section, you can move items to another holding by following either of these steps:
    1. Click the drag and drop column of the item you want to move and drag it over to the Holdings table to which you want to move it. A confirmation message appears and the item appears in its new Holdings table.
    2. Select the checkbox in the row of the item you want to move and click Move to > [Holdings record]. A confirmation message appears and the item appears in its new Holdings table.
  4. Optional: Repeat step 3 as needed.
  5. Once you are finished, click Actions > Stop items movement within an instance.

Moving holdings or items to another instance

  1. Find the instance with the holdings or items you want to move and select it.
  2. In the Instance record details pane, click Actions > Move holdings/items to another instance.
  3. In the Select instance dialog, in the Search & filter pane, search for the instance to which you want to move the holdings or items by entering search words in the box.
  4. Optional: Filter your results by Language, Resource Type, or Location.
  5. In the Search results, click on the instance to select it. Both instance records appear in the window and have drag and drop columns and checkbox columns in their Holdings tables.
  6. To move holdings to another instance, follow either of these steps:
    1. Click the ^ next to the Holdings name of the holding record you want to move and drag it over to the Holdings section to which you want to move it. In the Confirm move dialog, click Continue. The holding appears in its new Holdings section.
    2. Click Move to > [Instance record]. In the Confirm move dialog, click Continue. The holding appears in its new Holdings section.
  7. To move items to another instance, follow either of these steps:
    1. Click the drag and drop column in the row of the item you want to move and drag it over to the Holdings table to which you want to move it. In the Confirm move dialog, click Continue. The item appears in its new Holdings table.
    2. Select the checkbox in the row of the item you want to move and click Move to > [Instance record Holdings record]. In the Confirm move dialog, click Continue. The item appears in its new Holdings table.
  8. Once you are finished, click the X at either of the instance records.

Viewing requests

  1. Find the instance with the requests you want to view and select it.
  2. In the Instance record details pane, click Actions > View requests (number of requests). The Requests on items window appears.

Deleting an instance record

Note: An instance record cannot be deleted, but it may be suppressed.

  1. Find the instance you want to delete and select it.
  2. In the Instance record details pane, click Actions > Edit.
  3. In the Edit window, under Administrative data, click Suppress from discovery.
  4. Click Save and close. The instance record is updated.

Editing holdings records

  1. Find the instance with the holdings record you want to edit and select it.
  2. In the Instance record details pane, in the Holdings section, click View holdings.
  3. In the Holdings record window, click Actions > Edit.
  4. Make your desired changes to the holding record.
  5. Click Save and Close. The holding record is updated.

Duplicating holdings records

  1. Find the instance with the holdings record you want to edit and select it.
  2. In the Instance record details pane, in the Holdings section, click View holdings.
  3. In the Holdings record window, click Actions > Duplicate.
  4. Make your desired changes to the holding record.
  5. Click Save and Close. The holding record is duplicated.

Deleting holdings records

  1. Find the instance with the holdings record you want to edit and select it.
  2. In the Instance record details pane, in the Holdings section, click View holdings.
  3. In the Holdings record window, click Actions > Delete.
  4. In the Confirm deletion of holdings record dialog, click Delete. The holding record is deleted.

Editing an item record

  1. Find the instance with the item you want to edit and select it.
  2. In the Instance record details pane, in the Holdings section, click the Item barcode of the item.
  3. In the Item record details window, click Actions > Edit.
  4. Make your desired changes to the item record.
  5. Click Save and close. The item record is updated.

Duplicating an item record

  1. Find the instance with the item you want to duplicate and select it.
  2. In the Instance record details pane, in the Holdings section, click the Item barcode of the item.
  3. In the Item record details window, click Actions > Duplicate.
  4. Make your desired changes to the item record.
  5. Click Save and close. The item record is duplicated.

Deleting an item record

  1. Find the instance with the item you want to delete and select it.
  2. In the Instance record details pane, in the Holdings section, click the Item barcode of the item.
  3. In the Item record details window, click Actions > Delete.
  4. In the Confirm deletion of item dialog, click Delete. The item record is deleted.

Marking item status

  1. Find the instance with the item you want to change.
  2. In the Instance record details pane, in the Holdings section, click the Item barcode of the item.
  3. In the Item record details window, click Actions > Mark as ….
  4. In the **Confirm item status ** dialog, click Confirm. The item record is updated and its Item status changes to the value selected.

Note: See Platform Essentials for more information on Item status.

Creating a new request

  1. Find the instance with the item you want to create a new request for and select it.
  2. In the Instance record details pane, in the Holdings section, click the Item barcode of the item.
  3. In the Item record details window, click Actions > New Request.
  4. In the New request window, Select a Request type. The options that appear depend on the Item status of the item you are requesting.
  5. Optional: Enter a Request expiration date. If the request is still open by the selected date, it closes and its status changes to Closed - Unfilled.
  6. In the Requester information box, either scan the requester’s barcode or enter the barcode and click Enter.
  7. If you do not have the requester’s barcode, click Requester look-up to search for the patron:
    1. In the Select User dialog, search for the requester.
    2. Once you find the requester, select them from the User Search Results list. They are applied to the request and their information appears.
  8. Select the Fulfilment preference.
  9. Select the Pickup service point or Delivery address, depending on your selection in the previous step.
  10. Click Save & close. The request is saved and the Request Detail pane appears. The patron receives an email notification saying their request was received by the library, if you have this notification configured.
Last modified May 9, 2022